Merge pull request #1057 from priyadi/selectable_output

Implement runtime selectable output (USB or BT)

keyboards/handwired/onekey/keymaps/default/keymap.c

@@ -1,5 +1,5 @@
 #include "onekey.h"
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    { KC_A }
+    {{ KC_A }}
 };

keyboards/handwired/reddot/Makefile

@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../../Makefile
+endif

keyboards/handwired/reddot/config.h

@@ -0,0 +1,162 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    upils
+#define PRODUCT         reddot
+#define DESCRIPTION     A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 19
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, E6 }
+#define MATRIX_COL_PINS { B7,  D0,  D1,  D2,  D3,  C6,  C7,  D5,  D4,  D7,  B4,  B5,  B6,  F7,  F6,  F5,  F4,  F1,  F0 }
+#define UNUSED_PINS
+
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboards/handwired/reddot/keymaps/default/keymap.c

@@ -0,0 +1,29 @@
+#include "reddot.h"
+#include "../../../../../quantum/keymap_extras/keymap_french.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[0] = KEYMAP(
+ KC_ESC,    KC_F1,    KC_F2,    KC_F3,     KC_F4,    KC_F5,   KC_TAB,  KC_CAPS,    KC_F6,    KC_F7,    KC_F8,    KC_F9,        KC_F10,  KC_F11,    KC_F12,   KC_FN0, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS,\
+ KC_LALT,    FR_AMP, FR_EACU,  FR_QUOT, FR_APOS,    FR_LPRN,  KC_BSPACE,   KC_DELETE, FR_MINS,  FR_EGRV, FR_UNDS,  FR_CCED,       FR_AGRV,    FR_RPRN,  FR_EQL,       KC_INSERT,    KC_HOME,    KC_PGUP,\
+ KC_LGUI,    FR_A,     FR_Z,     KC_E,      KC_R,     KC_T,  KC_LSFT,   KC_ENT,     KC_Y,     KC_U,     KC_I,     KC_O,          KC_P,    FR_CIRC,      FR_DLR,       KC_DELETE,    KC_END,    KC_PGDOWN, KC_KP_PLUS,\
+ KC_LCTL,    FR_Q,     KC_S,     KC_D,      KC_F,     KC_G,   KC_ENT,            KC_H,     KC_J,     KC_K,     KC_L,          FR_M,  FR_UGRV,  FR_ASTR,       KC_KP_1,    KC_UP,    KC_KP_3,\
+ FR_LESS, FR_W,     KC_X,     KC_C,      KC_V,     KC_B,   KC_SPACE,          KC_SPACE,     KC_N, FR_COMM,   FR_SCLN,  FR_COLN,     FR_EXLM,  NO_ALGR,    KC_LEFT,    KC_DOWN, KC_RIGHT, KC_KP_ENTER),
+
+ [1] = KEYMAP(
+  KC_ESC,    KC_F1,    KC_F2,    KC_F3,     KC_F4,    KC_F5,   KC_TAB,  KC_CAPS,    KC_F6,    KC_F7,    KC_F8,    KC_F9,        KC_F10,  KC_F11,    KC_F12,   KC_FN0, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS,\
+  KC_LALT,    FR_AMP, FR_EACU,  FR_QUOT, FR_APOS,    FR_LPRN,  KC_BSPACE,   KC_DELETE, FR_MINS,  FR_EGRV, FR_UNDS,  FR_CCED,       FR_AGRV,    FR_RPRN,  FR_EQL,       KC_7,    KC_8,    KC_9,\
+  KC_LGUI,    FR_A,     FR_Z,     KC_E,      KC_R,     KC_T,  KC_LSFT,   KC_ENT,     KC_Y,     KC_U,     KC_I,     KC_O,          KC_P,    FR_CIRC,      FR_DLR,       KC_4,    KC_5,    KC_6, KC_KP_PLUS,\
+  KC_LCTL,    FR_Q,     KC_S,     KC_D,      KC_F,     KC_G,   KC_ENT,            KC_H,     KC_J,     KC_K,     KC_L,          FR_M,  FR_UGRV,  FR_ASTR,       KC_1,    KC_2,    KC_3,\
+  FR_LESS, FR_W,     KC_X,     KC_C,      KC_V,     KC_B,   KC_SPACE,          KC_SPACE,     KC_N, FR_COMM,   FR_SCLN,  FR_COLN,     FR_EXLM,  NO_ALGR,    KC_LEFT,    KC_DOWN, KC_RIGHT, KC_KP_ENTER),
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+  ACTION_LAYER_TOGGLE(1),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE;
+};
+

keyboards/handwired/reddot/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for handwired/reddot

keyboards/handwired/reddot/readme.md

@@ -0,0 +1,24 @@
+## RedDot Specific Info ##
+
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent README.md](/README.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboard/reddot folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top README.md) and existent keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+```
+$ make KEYMAP=[default|jack|<name>]
+```
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.

keyboards/handwired/reddot/reddot.c

@@ -0,0 +1,7 @@
+#include "reddot.h"
+
+void matrix_init_kb(void) {
+
+        matrix_init_user();
+}
+

keyboards/handwired/reddot/reddot.h

@@ -0,0 +1,20 @@
+#ifndef REDDOT_H
+#define REDDOT_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E,   k10, k11, k12, k13, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E,   k30, k31, k32, \
+    k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E,   k50, k51, k52, k53, \
+    k60, k61, k62, k63, k64, k65, k66,      k68, k69, k6A, k6B, k6C, k6D, k6E,   k70, k71, k72, \
+    k80, k81, k82, k83, k84, k85, k86,      k88, k89, k8A, k8B, k8C, k8D, k8E,   k90, k91, k92, k93\
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k10, k11, k12, k13 }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k30, k31, k32,    KC_NO }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k50, k51, k52, k53 }, \
+    { k60, k61, k62, k63, k64, k65, k66,    KC_NO, k68, k69, k6A, k6B, k6C, k6D, k6E, k70, k71, k72,    KC_NO }, \
+    { k80, k81, k82, k83, k84, k85, k86,    KC_NO, k88, k89, k8A, k8B, k8C, k8D, k8E, k90, k91, k92, k93 } \
+}
+
+#endif

keyboards/handwired/reddot/rules.mk

@@ -0,0 +1,88 @@
+
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+# for avr upload
+USB ?= /dev/cu.usbmodem1421
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+ifdef TEENSY2
+    OPT_DEFS += -DATREUS_TEENSY2
+    ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
+else
+    OPT_DEFS += -DATREUS_ASTAR
+    OPT_DEFS += -DCATERINA_BOOTLOADER
+    ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
+                            avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
+endif
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# MCU name
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no        # Console for debug(+400)
+COMMAND_ENABLE ?= no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
+
+upload: build
+	$(ATREUS_UPLOAD_COMMAND)
+

keyboards/lets_split/config.h

@@ -26,4 +26,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef SUBPROJECT_rev2
     #include "rev2/config.h"
 #endif
+#ifdef SUBPROJECT_rev2fliphalf
+	#include "../../rev2fliphalf/config.h"
+#endif
 #endif

keyboards/lets_split/keymaps/i2c/config.h

@@ -24,4 +24,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 #ifdef SUBPROJECT_rev2
     #include "../../rev2/config.h"
+#endif
+#ifdef SUBPROJECT_rev2fliphalf
+	#include "../../rev2fliphalf/config.h"
 #endif

keyboards/lets_split/keymaps/serial/config.h

@@ -26,4 +26,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 #ifdef SUBPROJECT_rev2
     #include "../../rev2/config.h"
+#endif
+#ifdef SUBPROJECT_rev2fliphalf
+	#include "../../rev2fliphalf/config.h"
 #endif

keyboards/lets_split/lets_split.h

@@ -7,6 +7,9 @@
 #ifdef SUBPROJECT_rev2
     #include "rev2.h"
 #endif
+#ifdef SUBPROJECT_rev2fliphalf
+	#include "rev2fliphalf.h"
+#endif
 
 #include "quantum.h"
 

keyboards/lets_split/rev2/rev2.h

@@ -9,10 +9,10 @@
 //void promicro_bootloader_jmp(bool program);
 
 #define KEYMAP( \
-	k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \
-	k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \
-	k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \
-	k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \
+	k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \
+	k10, k11, k12, k13, k14, k15, k55, k54, k53, k52, k51, k50, \
+	k20, k21, k22, k23, k24, k25, k65, k64, k63, k62, k61, k60, \
+	k30, k31, k32, k33, k34, k35, k75, k74, k73, k72, k71, k70 \
 	) \
 	{ \
 		{ k00, k01, k02, k03, k04, k05 }, \

keyboards/lets_split/rev2fliphalf/Makefile

@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif

keyboards/lets_split/rev2fliphalf/config.h

@@ -0,0 +1,91 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x3060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Wootpatoot
+#define PRODUCT         Lets Split v2
+#define DESCRIPTION     A split keyboard for the cheap makers
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 6
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D7, E6, B4, B5 }
+//#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
+#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+//#define CATERINA_BOOTLOADER
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 12    // Number of LEDs
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+
+#endif

keyboards/lets_split/rev2fliphalf/rev2fliphalf.c

@@ -0,0 +1,32 @@
+#include "lets_split.h"
+
+#ifdef AUDIO_ENABLE
+    float tone_startup[][2] = SONG(STARTUP_SOUND);
+    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+void matrix_init_kb(void) {
+
+    #ifdef AUDIO_ENABLE
+        _delay_ms(20); // gets rid of tick
+        PLAY_NOTE_ARRAY(tone_startup, false, 0);
+    #endif
+
+    // // green led on
+    // DDRD |= (1<<5);
+    // PORTD &= ~(1<<5);
+
+    // // orange led on
+    // DDRB |= (1<<0);
+    // PORTB &= ~(1<<0);
+
+	matrix_init_user();
+};
+
+void shutdown_user(void) {
+    #ifdef AUDIO_ENABLE
+        PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+	_delay_ms(150);
+	stop_all_notes();
+    #endif
+}

keyboards/lets_split/rev2fliphalf/rev2fliphalf.h

@@ -0,0 +1,28 @@
+#ifndef REV2FLIPHALF_H
+#define REV2FLIPHALF_H
+
+#include "../lets_split.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+//void promicro_bootloader_jmp(bool program);
+
+#define KEYMAP( \
+	k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \
+	k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \
+	k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \
+	k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \
+	) \
+	{ \
+		{ k00, k01, k02, k03, k04, k05 }, \
+		{ k10, k11, k12, k13, k14, k15 }, \
+		{ k20, k21, k22, k23, k24, k25 }, \
+		{ k30, k31, k32, k33, k34, k35 }, \
+		{ k40, k41, k42, k43, k44, k45 }, \
+		{ k50, k51, k52, k53, k54, k55 }, \
+		{ k60, k61, k62, k63, k64, k65 }, \
+		{ k70, k71, k72, k73, k74, k75 } \
+	}
+
+#endif

keyboards/lets_split/rev2fliphalf/rules.mk

@@ -0,0 +1,5 @@
+BACKLIGHT_ENABLE = no
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif

quantum/quantum.c

@@ -1,4 +1,7 @@
 #include "quantum.h"
+#ifdef PROTOCOL_LUFA
+#include "outputselect.h"
+#endif
 
 #ifndef TAPPING_TERM
 #define TAPPING_TERM 200
@@ -243,6 +246,36 @@ bool process_record_quantum(keyrecord_t *record) {
 	  return false;
       break;
 	#endif
+    #ifdef PROTOCOL_LUFA
+    case OUT_AUTO:
+      if (record->event.pressed) {
+        set_output(OUTPUT_AUTO);
+      }
+      return false;
+      break;
+    case OUT_USB:
+      if (record->event.pressed) {
+        set_output(OUTPUT_USB);
+      }
+      return false;
+      break;
+    #ifdef BLUETOOTH_ENABLE
+    case OUT_BT:
+      if (record->event.pressed) {
+        set_output(OUTPUT_BLUETOOTH);
+      }
+      return false;
+      break;
+    #endif
+    #ifdef ADAFRUIT_BLE_ENABLE
+    case OUT_BLE:
+      if (record->event.pressed) {
+        set_output(OUTPUT_ADAFRUIT_BLE);
+      }
+      return false;
+      break;
+    #endif
+    #endif
     case MAGIC_SWAP_CONTROL_CAPSLOCK ... MAGIC_TOGGLE_NKRO:
       if (record->event.pressed) {
         // MAGIC actions (BOOTMAGIC without the boot)

quantum/quantum.h

@@ -15,7 +15,6 @@
 #ifdef RGBLIGHT_ENABLE
   #include "rgblight.h"
 #endif
-
 #include "action_layer.h"
 #include "eeconfig.h"
 #include <stddef.h>

quantum/quantum_keycodes.h

@@ -141,6 +141,16 @@ enum quantum_keycodes {
     PRINT_ON,
     PRINT_OFF,
 
+    // output selection
+    OUT_AUTO,
+    OUT_USB,
+#ifdef BLUETOOTH_ENABLE
+    OUT_BT,
+#endif
+#ifdef ADAFRUIT_BLE_ENABLE
+    OUT_BLE,
+#endif
+
     // always leave at the end
     SAFE_RANGE
 };

tmk_core/protocol/lufa.mk

@@ -8,13 +8,14 @@ LUFA_PATH ?= $(LUFA_DIR)/LUFA-git
 ifneq (, $(wildcard $(TMK_PATH)/$(LUFA_PATH)/LUFA/Build/lufa_sources.mk))
     # New build system from 20120730
     LUFA_ROOT_PATH = $(LUFA_PATH)/LUFA
-    include $(TMK_PATH)/$(LUFA_PATH)/LUFA/Build/lufa_sources.mk 
+    include $(TMK_PATH)/$(LUFA_PATH)/LUFA/Build/lufa_sources.mk
 else
     include $(TMK_PATH)/$(LUFA_PATH)/LUFA/makefile
 endif
 
 LUFA_SRC = lufa.c \
 	   descriptor.c \
+	   outputselect.c \
 	   $(LUFA_SRC_USB)
 
 ifeq ($(strip $(MIDI_ENABLE)), yes)

tmk_core/protocol/lufa/lufa.c

@@ -53,6 +53,7 @@
 #include "lufa.h"
 #include "quantum.h"
 #include <util/atomic.h>
+#include "outputselect.h"
 
 #ifdef NKRO_ENABLE
   #include "keycode_config.h"
@@ -589,59 +590,33 @@ void EVENT_USB_Device_ControlRequest(void)
 
 /*******************************************************************************
  * Host driver
-p
  ******************************************************************************/
 static uint8_t keyboard_leds(void)
 {
     return keyboard_led_stats;
 }
 
-#define SendToUSB 1
-#define SendToBT  2
-#define SendToBLE 4
-
-static inline uint8_t where_to_send(void) {
-#ifdef ADAFRUIT_BLE_ENABLE
-#if 0
-  if (adafruit_ble_is_connected()) {
-    // For testing, send to BLE as a priority
-    return SendToBLE;
-  }
-#endif
-
-  // This is the real policy
-  if (USB_DeviceState != DEVICE_STATE_Configured) {
-    if (adafruit_ble_is_connected()) {
-      return SendToBLE;
-    }
-  }
-#endif
-  return ((USB_DeviceState == DEVICE_STATE_Configured) ? SendToUSB : 0)
-#ifdef BLUETOOTH_ENABLE
-    || SendToBT
-#endif
-    ;
-}
-
 static void send_keyboard(report_keyboard_t *report)
 {
-#ifdef BLUETOOTH_ENABLE
-    bluefruit_serial_send(0xFD);
-    for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) {
-        bluefruit_serial_send(report->raw[i]);
-    }
-#endif
-
     uint8_t timeout = 255;
     uint8_t where = where_to_send();
 
+#ifdef BLUETOOTH_ENABLE
+    if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
+        bluefruit_serial_send(0xFD);
+        for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) {
+            bluefruit_serial_send(report->raw[i]);
+        }
+    }
+#endif
+
 #ifdef ADAFRUIT_BLE_ENABLE
-    if (where & SendToBLE) {
+    if (where == OUTPUT_ADAFRUIT_BLE) {
       adafruit_ble_send_keys(report->mods, report->keys, sizeof(report->keys));
     }
 #endif
 
-    if (!(where & SendToUSB)) {
+    if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
       return;
     }
 
@@ -681,30 +656,31 @@ static void send_keyboard(report_keyboard_t *report)
 static void send_mouse(report_mouse_t *report)
 {
 #ifdef MOUSE_ENABLE
-
-#ifdef BLUETOOTH_ENABLE
-    bluefruit_serial_send(0xFD);
-    bluefruit_serial_send(0x00);
-    bluefruit_serial_send(0x03);
-    bluefruit_serial_send(report->buttons);
-    bluefruit_serial_send(report->x);
-    bluefruit_serial_send(report->y);
-    bluefruit_serial_send(report->v); // should try sending the wheel v here
-    bluefruit_serial_send(report->h); // should try sending the wheel h here
-    bluefruit_serial_send(0x00);
-#endif
-
     uint8_t timeout = 255;
-
     uint8_t where = where_to_send();
 
+#ifdef BLUETOOTH_ENABLE
+    if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
+        bluefruit_serial_send(0xFD);
+        bluefruit_serial_send(0x00);
+        bluefruit_serial_send(0x03);
+        bluefruit_serial_send(report->buttons);
+        bluefruit_serial_send(report->x);
+        bluefruit_serial_send(report->y);
+        bluefruit_serial_send(report->v); // should try sending the wheel v here
+        bluefruit_serial_send(report->h); // should try sending the wheel h here
+        bluefruit_serial_send(0x00);
+    }
+#endif
+
 #ifdef ADAFRUIT_BLE_ENABLE
-    if (where & SendToBLE) {
+    if (where == OUTPUT_ADAFRUIT_BLE) {
       // FIXME: mouse buttons
       adafruit_ble_send_mouse_move(report->x, report->y, report->v, report->h);
     }
 #endif
-    if (!(where & SendToUSB)) {
+
+    if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
       return;
     }
 
@@ -746,32 +722,34 @@ static void send_system(uint16_t data)
 
 static void send_consumer(uint16_t data)
 {
-
-#ifdef BLUETOOTH_ENABLE
-    static uint16_t last_data = 0;
-    if (data == last_data) return;
-    last_data = data;
-    uint16_t bitmap = CONSUMER2BLUEFRUIT(data);
-    bluefruit_serial_send(0xFD);
-    bluefruit_serial_send(0x00);
-    bluefruit_serial_send(0x02);
-    bluefruit_serial_send((bitmap>>8)&0xFF);
-    bluefruit_serial_send(bitmap&0xFF);
-    bluefruit_serial_send(0x00);
-    bluefruit_serial_send(0x00);
-    bluefruit_serial_send(0x00);
-    bluefruit_serial_send(0x00);
-#endif
-
     uint8_t timeout = 255;
     uint8_t where = where_to_send();
 
+#ifdef BLUETOOTH_ENABLE
+    if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
+        static uint16_t last_data = 0;
+        if (data == last_data) return;
+        last_data = data;
+        uint16_t bitmap = CONSUMER2BLUEFRUIT(data);
+        bluefruit_serial_send(0xFD);
+        bluefruit_serial_send(0x00);
+        bluefruit_serial_send(0x02);
+        bluefruit_serial_send((bitmap>>8)&0xFF);
+        bluefruit_serial_send(bitmap&0xFF);
+        bluefruit_serial_send(0x00);
+        bluefruit_serial_send(0x00);
+        bluefruit_serial_send(0x00);
+        bluefruit_serial_send(0x00);
+    }
+#endif
+
 #ifdef ADAFRUIT_BLE_ENABLE
-    if (where & SendToBLE) {
+    if (where == OUTPUT_ADAFRUIT_BLE) {
       adafruit_ble_send_consumer_key(data, 0);
     }
 #endif
-    if (!(where & SendToUSB)) {
+
+    if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
       return;
     }
 

tmk_core/protocol/lufa/outputselect.c

@@ -0,0 +1,56 @@
+/*
+Copyright 2017 Priyadi Iman Nurcahyo
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "lufa.h"
+#include "outputselect.h"
+#ifdef ADAFRUIT_BLE_ENABLE
+    #include "adafruit_ble.h"
+#endif
+
+uint8_t desired_output = OUTPUT_DEFAULT;
+
+void set_output(uint8_t output) {
+    set_output_user(output);
+    desired_output = output;
+}
+
+__attribute__((weak))
+void set_output_user(uint8_t output) {
+}
+
+uint8_t auto_detect_output(void) {
+    if (USB_DeviceState == DEVICE_STATE_Configured) {
+        return OUTPUT_USB;
+    }
+
+#ifdef ADAFRUIT_BLE_ENABLE
+    if (adafruit_ble_is_connected()) {
+        return OUTPUT_ADAFRUIT_BLE;
+    }
+#endif
+
+#ifdef BLUETOOTH_ENABLE
+    return OUTPUT_BLUETOOTH; // should check if BT is connected here
+#endif
+
+    return OUTPUT_NONE;
+}
+
+uint8_t where_to_send(void) {
+    if (desired_output == OUTPUT_AUTO) {
+        return auto_detect_output();
+    }
+    return desired_output;
+}
+

tmk_core/protocol/lufa/outputselect.h

@@ -0,0 +1,41 @@
+/*
+Copyright 2017 Priyadi Iman Nurcahyo
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+enum outputs {
+    OUTPUT_AUTO,
+
+    OUTPUT_NONE,
+    OUTPUT_USB,
+    OUTPUT_BLUETOOTH,
+    OUTPUT_ADAFRUIT_BLE,
+
+    // backward compatibility
+    OUTPUT_USB_AND_BT
+};
+
+/**
+ * backward compatibility for BLUETOOTH_ENABLE, send to BT and USB by default
+ */
+#ifndef OUTPUT_DEFAULT
+    #ifdef BLUETOOTH_ENABLE
+        #define OUTPUT_DEFAULT OUTPUT_USB_AND_BT
+    #else
+        #define OUTPUT_DEFAULT OUTPUT_AUTO
+    #endif
+#endif
+
+void set_output(uint8_t output);
+void set_output_user(uint8_t output);
+uint8_t auto_detect_output(void);
+uint8_t where_to_send(void);

util/travis_build.sh

@@ -4,15 +4,19 @@ TRAVIS_COMMIT_MESSAGE="${TRAVIS_COMMIT_MESSAGE:-none}"
 TRAVIS_COMMIT_RANGE="${TRAVIS_COMMIT_RANGE:-HEAD~1..HEAD}"
 
 if [[ "$TRAVIS_COMMIT_MESSAGE" != *"[skip build]"* ]] ; then 
+	exit_code=0
 	NEFM=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -Ev '^(keyboards/)' | wc -l)
 	if [[ $NEFM -gt 0 ]] ; then
 		echo "Making all keymaps for all keyboards"
 		make all-keyboards AUTOGEN="true"
+		: $((exit_code = $exit_code + $?))
 	else
 		MKB=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -oP '(?<=keyboards\/)([a-zA-Z_]+)' | sort -u)
 		for KB in $MKB ; do
 			echo "Making all keymaps for $KB"
 			make "$KB" AUTOGEN=true
+			: $((exit_code = $exit_code + $?))
 		done
 	fi
+	exit $exit_code
 fi

util/travis_compiled_push.sh

@@ -41,7 +41,7 @@ if [[ "$TRAVIS_COMMIT_MESSAGE" != *"[skip build]"* ]] ; then
 	#rm -rf keyboard
 	#rm -rf keyboards
 	yes | cp -rf ../qmk_firmware/keyboards .
-	mkdir keyboards/ergodox_ez/
+	#mkdir keyboards/ergodox_ez/
 	cp ../qmk_firmware/util/ergodox_ez.html keyboards/ergodox_ez/index.html
 	cp ../qmk_firmware/readme.md qmk_readme.md
 	./generate.sh