Change every occurence of up_switch_context to use this_task() as the first parameter.
"nxsched_add_readytorun" returns "true" if context switch is required. "nxsched_add_readytorun"
typically could only switch the assigned/running task to the one which is passed in as parameter.
But this is not strictly guaranteed in SMP; if other CPUs tweak with affinities or priorities,
it may be possible that the running task after the call is changed, but is some other
task from the readytorun list (and it should be, if there is higher priority one available or the
affinity of the added task prevents it to be scheduled in, but the previous head of the readytorun
list should run.
this_task() is always the correct one to switch to, since it always points to the tcb which was
just switched in by the nxsched_add_readytorun.
This is also a precursor to re-writing the SMP queue logic to remove pending lists for SMP.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
Checking only adds a race condition. The checking if the wdog is active
or not must be done inside wd_cancel, where the proper spinlock is held
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
Change mqueue_msg_s to a dynamic array so that
mqueue msg can be malloc based on the msg size
of the current data when applied dynamically.
Signed-off-by: zhangyuan29 <zhangyuan29@xiaomi.com>
1. mainly for long time within critical_section
2. move out memcpy buffer from enter_critical_section()
3. let mq_send() return fail when mq buffer full in ISR
Signed-off-by: ligd <liguiding1@xiaomi.com>
reason:
1In the scenario of active waiting, context switching is inevitable, and we can eliminate redundant judgments.
code size
before
hujun5@hujun5-OptiPlex-7070:~/downloads1/vela_sim/nuttx$ size nuttx
text data bss dec hex filename
262848 49985 63893 376726 5bf96 nuttx
after
hujun5@hujun5-OptiPlex-7070:~/downloads1/vela_sim/nuttx$ size nuttx
text data bss dec hex filename
263324 49985 63893 377202 5c172 nuttx
reduce code size by -476
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
In POSIX testcase "open_posix_testsuite/conformance/interfaces/mq_receive/11-2.c", it will return "EPERM" when message queue is not opened for reading, but the standard POSIX specification in URL “https://pubs.opengroup.org/onlinepubs/9699919799/functions/mq_receive.html” requires that "EBADF" be returned.So in this change, i update it.
Signed-off-by: yangjiao <yangjiao@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
NuttX kernel should not use the syscall functions, especially after
enabling CONFIG_SCHED_INSTRUMENTATION_SYSCALL, all system functions
will be traced to backend, which will impact system performance.
Signed-off-by: chao an <anchao@xiaomi.com>
It takes about 10 cycles to obtain the task list according to the task
status. In most cases, we know the task status, so we can directly
add the task from the specified task list to reduce time consuming.
It takes about 10 cycles to obtain the task list according to the task
status. In most cases, we know the task status, so we can directly
delete the task from the specified task list to reduce time consuming.
There one ways can caused this:
mq_timedreceive
TIMER IRQ do wd_timer -> wd_func1 mq_send
-> wd_func2 nxmq_rcvtimeout -> crash
Resolve:
Stop the watchdog when mq_send
Signed-off-by: ligd <liguiding1@xiaomi.com>
because not all compiler support the weak attribute, and
many features are either always used or guarded by config.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
